The 10:1 distance rule
Divide the expected scanning distance by 10 to get the minimum width of the code. Someone scanning from 30 cm needs a code about 3 cm wide. A poster read from 2 m needs about 20 cm.
| Where it is used | Typical scan distance | Suggested minimum width |
|---|---|---|
| Business card | 20 to 30 cm | 2 to 2.5 cm |
| Restaurant table card | 30 to 40 cm | 3 to 4 cm |
| Flyer or brochure | 30 to 50 cm | 3 to 5 cm |
| Poster or shop window | 1 to 2 m | 10 to 20 cm |
| Billboard | 5 m and up | 50 cm and up |
These are starting points. Always test with a real phone at the real distance.
Keep the quiet zone
Leave a clear margin around the code, at least four modules wide (roughly the width of four of the little squares). Do not let borders, photos or text touch it.
Contrast and color
- Use a dark code on a light background.
- Avoid inverting colors unless you have tested the scanners your audience uses.
- Black on white is always safe; dark blue or dark green on white also works well.
Placement tips
- Put the code at eye or hand height, never somewhere people must stretch or crouch.
- Avoid folds, seams, curved surfaces and glossy laminate.
- Add a short call to action beside it, such as "Scan for the menu". People scan more when they know what they will get.
- Make sure there is phone signal or WiFi where the code is displayed, otherwise a link code will not open.
Export the right file
For print, download the code as SVG. It is a true vector, so it stays razor sharp at any size. For screens and social posts, a PNG is fine. Make your code now with the free QRForge generator.
Why size and density are linked
Every QR code is made of a grid of small squares called modules. A short link might use 25 by 25 modules, while a long vCard might need more than 45 by 45. When you print at a fixed width, more modules means each square is smaller. Cameras need each module to be at least a few pixels wide, so dense codes need to be printed larger than simple ones. That is why shortening a URL or trimming a contact card makes a code easier to scan at the same size.
Material and finish
- Paper and card: matte stock scans best. Avoid high-gloss coating that causes reflections.
- Stickers and labels: use matte vinyl and avoid placing them over curved edges.
- Metal, glass and plastic: reflective surfaces need an anti-glare finish. Engraved codes need strong contrast between the engraved and unengraved areas.
- Fabric and apparel: large codes with high contrast work, but stretching and folds can distort them.
Common placement mistakes
- Placing the code on the fold of a brochure or menu.
- Putting it at the very bottom of a poster, where people have to crouch.
- Using a code in a place with no signal, such as inside a lift or basement, when it opens a website.
- Placing the code behind glass where reflections hide it.
- Stretching the code to fit a layout rather than keeping it square.
Design checklist
- Keep the code square, with at least a four-module quiet zone.
- Use dark modules on a light background.
- Add a one-line call to action next to it.
- Export as SVG for print, PNG for screens.
- Print one test copy, scan it at the real distance, then print the full run.
Frequently asked questions
What is the smallest QR code that still works?
For short content, around 2 cm wide can work on a business card when scanned from close range. For anything read from a distance, follow the 10:1 rule.
Can I use colors in a QR code?
Yes, as long as the contrast between the code and background stays high. Dark colors on a light background are safest.
Should I add a border?
A plain white margin is better than a decorative border. Anything that touches the code can interfere with scanning.
Create a Free QR Code
No signup, no expiry, nothing uploaded. Generated in your browser.
Open the Generator →